Container accessories

We have a variety of accessories available for our containers. From Danish container shelves and wheels to CC accessories. This page contains an overview of all our accessories.

View specifications

Container accessories:

  • Suitable for almost all our containers
  • For increasing container height
  • For extra load capacity
  • To extend containers
  • To protect taller plants

Container accessories:
from wheel to wrapper

We have a variety of accessories available for our containers. We offer various attachment and extension pieces in metal and plastic. Our range also includes accessories such as the Danish Heavy Duty Shelf, wrapping poles and repair parts.

Need wheels? Our range includes a wide selection. We would be happy to advise you on the most suitable choice. Do you have special requirements and wishes with which your new wheels or rolling containers must comply? We provide a matching wheel combination of nylon and rubber fixed wheels, and swivel wheels. For each chassis you use two swivel wheels with two fixed wheels or four swivel wheels.

We have a variety of accessories available for our containers. We have various attachments and extension pieces, wrapping poles and rubber and nylon wheels.

Do you have any questions?
Ask Martien at +31 297 23 17 27

or fill in the form below

Frequently asked questions

What should I do with defective equipment?

Broken frames should be returned separately, stacked 10 high with 4 posts per layer in between. The frames must have an original iron CC label and an original RFID lock.

Broken shelves should be returned separately, stacked 30 shelves per trolley. Plastic, chipboard, iron or uncoated shelves will not be accepted. When returning a broken shelf, you should always return the two long iron frames as well.

How should I return the rented equipment?

CC Undercarriages should be stacked 10 high with 4 posts per layer in between. The labels and locks should all be on the same side. There should be no broken items in the stack; these should be returned separately. Stacks containing broken items or with non-scannable RFID locks will not be accepted for return.

CC Shelves should be stacked with 30 units per container. There must not be any broken shelves in the stack when the shelves are returned. We consider a shelf with a missing short iron strip to be a broken shelf as well. Stacks containing broken items will not be accepted for return.

What Flora Holland receivables number can I use to return my hired CC Containers and CC Shelves?

If you wish to return the items hired from us through Flora Holland, the receivables number that can be used is: 469563. However, this must always be preceded by consultation. We will then determine with you whether the containers and shelves can be recorded or whether we will take them directly from your receivables number. This is because of the storage and handling fees charged by the Flora Holland auction.

How do I record my returned CC Containers and CC Shelves?

You can return CC containers and CC shelves hired from us via www.myfloraholland.com. Please note that you will need a receivables number and login code for FloraHolland. If you require assistance, please contact Rinie Ravensbergen, tel. +31 297-231723

Can I also have CC Containers and CC Shelves recorded through the Landgard auction?

We allow CC containers and CC Shelves to be recorded through Landgard in Germany. However, due to availability, please always confer about the options first. Our receivables number at Landgard is: 379650.

Can I have DC Containers and DC Shelves repaired?

Van Vliet takes care of all repairs and maintenance to DC Containers and accessories.

Does Van Vliet also arrange transport?

Van Vliet has its own fleet of vehicles, allowing your order to be delivered quickly and on time.

Does Van Vliet also do Balance Management?

Van Vliet can monitor your daily container balance at the Flora Holland auction as an additional free service. Moreover pool management.

Where do I find the specifications for the containers and accessories?

Click on Products on our website then select the product. After making a choice you will see the corresponding specifications.

What are the business hours of Van Vliet?

Van Vliet is open Monday to Friday from 8:00am to 5:00pm. Different loading and unloading times can always be arranged in consultation.

Did you not find an answer to your question? Please contact us

Accessories

Plastic stacking block

When stacking up DC/CC containers, safety is very important.To prevent incidents and accidents Van Vliet introduced this innovation.The plastic stacking block ensures that the pyramid is locked on four sides when the chassis is stacked on the rods.

Metal attachment

Use attachments to create a more efficient layout of the containers and make it possible to place additional shelves above the ‘normal’ container height. The metal attachments are available in two versions: 39 cm with 7 holes (50 per bundle); and 65 cm with 13 holes (50 per bundle).
These attachments fit on:
DC Container
DC Mesh Wire Container
Half Danish container
CC Container
Maestro Container

Plastic extension piece

Use extension pieces to create a more efficient layout of the containers and make it possible to place additional shelves above the ‘normal’ container height. The plastic extension pieces measure 46 cm with 9 holes (198 per box/36 boxes per pallet).
These extension pieces fit on:
DC Container
DC Mesh Wire Container
Half Danish container
CC Container
Maestro Container

Long wrapping pole

By placing wrapping poles on top of the rod height in combination with foil, higher plants are also protected during transport. The wrapping poles are made of heavy and high quality KUMA. Our range includes various lengths of wrapping poles:

  • 45 cm, 36 dozen per pallet, 140 stuks per box.
  • 71,5 cm, 18 dozen per pallet, 170 stuks per box.

The wrapping poles fit on:
DC Container
DC Mesh Wire Container
Half Danish Container
CC Container
Maestro Container

Nylon Wheels

Our nylon wheels, with their load capacity of 100 kg per wheel, have a circumference of 125 mm. They are available per box of 12 (a minimum purchase of 5 boxes applies).
Our nylon fixed and swivel wheels fit on:
DC Container
DC Mesh Wire Container
Half Danish Container
CC Container
CC Euro Container
Maestro Container

Rubber Wheels

Rubber wheels are especially suitable reducing the noise containers make when they are moved. The rubber swivel and fixed wheels are available in two versions: a standard version and a heavy version. Our standard rubber wheels, with their load capacity of 250 kg per wheel, have a circumference of 125 mm. The heavy version wheels, with their load capacity of 375 kg per wheel, also have a circumference of 125 mm. Both versions are available per box of 20 (a minimum purchase of 5 boxes applies).
Our rubber fixed and swivel wheels fit on:
DC Container
DC Cage Container
Half Danish Container
CC Container
CC Euro Container
Maestro Container

CCQ Posts

The CCQ posts are of a heavy quality and are hot-dip galvanised.The ordinary version, including iron spacer, is 1800 mm (30 holes/2.0 mm thick/3,4 kg).

Alle dimensions

  • 1800 mm (30 holes / 2,5 mm thick / 3,4 kg / hot galvanised).
  • 1800 mm (30 holes / 1,8 mm thick / 2,3 kg / cold galvanised).
  • 1150 mm (15 holes / 1,8 mm thick / 1,5 kg / cold galvanised).
  • 770 mm (10 holes / 1,8 mm thick / 1,14 kg / cold galvanised).

Plastic safety caps

The posts used for the containers can have sharp edges at the ends. To protect customers in stores against this, you can place this plastic safety cap on the posts.

Is your desired accessory not listed? Please contact us